Contact Us

Call UsEmail Us
Tight access and hand demolition icon

Tight Access Demolition Sydney

Terraces, laneways, and confined sites where the machine has to fit the driveway

Tight access demolition Sydney work is the terrace, the laneway, and the site where a 15 tonne excavator would take the neighbour's fence with it. We bring the machine that fits and the hand work the machine cannot reach.

Tight Access Demolition Sydney – Elite Demolition & Excavation Sydney & Central Coast

How this job runs

The driveway is usually the limit, not the size of the house. A compact excavator handles most inner-city knock-downs and strip-outs. It can work in a terrace driveway without taking out the neighbour's fence. Rear additions off a laneway, overhead wires, and stairs that a bucket cannot reach are hand work, jackhammers, and sometimes a crane for a beam.

Trucks matter as much as the excavator. Spoil and demolition waste have to leave the street without blocking it all day. We look at parking, turning, and how many loads the job will take before we quote. A tight Bondi or Marrickville street is a different plan to an open Central Coast block. The method changes. The licences do not.

If the job is mostly a machine that will not fit, start on excavator hire for the 1.7 tonne tight-access plant. For the demolition itself, send photos of the gate and the street. That is the quote.

We inspect, then we quote. A couple of street photos tell us more than a floor plan. Call 0487 549 909 or use the contact form.

From first look to handover

  1. 01

    Measure the access

    Gate width, driveway, overhead wires, and where a truck can sit. If it does not fit, we say so before we book a machine that cannot work.

  2. 02

    Pick the method

    Compact excavator, hand work, or a mix. Rear work off a laneway is often more hands than bucket.

  3. 03

    Work the street

    Loads, parking, and neighbours get planned before the first morning. Tight sites fail on the street, not on the building.

Other demolition work

Full and partial house demolition

Full knock-downs, including the slab when that is the brief, and taking out part of a house while the rest stays

Detailed demolition and strip-out

Selective takes, tight work, and leaving the bits that have to stay

Interior demolition and strip-out

Kitchens, bathrooms, linings, and internal structure with the shell left standing

Back to Demolition

This sits under Demolition. If the job also needs another trade on the same site, say so on the quote. We inspect, then we quote.

Read the demolition page

Ready to get started?

Send the suburb, a short note on the tight access and hand demolition, and a couple of photos. We look at the site before we put a number on it. Call 0487 549 909 or use the contact form.

Tight access and hand demolition FAQs

Can you demolish a terrace with a narrow driveway?

Yes. That is a regular inner-city job. A compact machine and more hand work. Photos of the gate and the street are the first thing we need.

Do you do hand demolition without an excavator?

When the machine cannot reach, yes. Stairs, rear rooms, and sites with overhead wires often need that mix. We will not force a large excavator into a driveway that cannot take it.

Are Central Coast jobs less tight?

Some are. Ettalong and Terrigal can still be narrow and weather-affected. Gosford suburban streets are usually simpler on trucks. We still look at the access before we quote.

Locations We Serve